Unify OpenScape CP600 User Manual

150
Removing a Bluetooth device from the blacklist
@ If nec. Press Main Menu key.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
Open the device Softkey.
Confirm deletion with the Softkey. The entry is deleted.
^ Exit the menu.
Eddystone Beacon
Beacons are small devices that use Bluetooth to connect to smartphones or ta-
blets in the environment. In the retail sector, for example, they are used to pre-
sent personalized special offers to customers.
The phone can use Beacons to connect to smartphones or tablets in the area
via Bluetooth. You can then, for example, exchange information between the
phone and a smartphone. Eddystone is an open source project by Google for
Beacon applications.
Set-up/deactivate Eddystone Beacon
z You can also configure this setting via the web interface  page 217.
@ If nec. Press Main Menu key.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
The current status is displayed. Open the mode with Softkey.
Deactivate with Softkey,
or
Service/Settings
_
$
User:
-
_
$
Bluetooth
-
_
Blacklisted devices
-
_
†
Smartphone
Ö
_
Remove:
Ö
_
Service/Settings
_
$
User:
-
_
$
Bluetooth
-
_
Beacon
-
_
Mode
Disabled (unche- K
_
Disabled (unchecked)
ä
_

Unify OpenScape CP600 Specifications

General

Ethernet Ports	2 x 10/100/1000 Mbps
HD Voice	Yes
Display	Color TFT Display
Resolution	480 x 272 pixel
Connectivity	Gigabit Ethernet
Audio	HD Voice
Keys	4-way navigator key
Power	PoE (802.3af)
Protocols	SIP
Headset	EHS
USB Port	USB 2.0
Bluetooth	Optional
Supported Codecs	G.711, G.722, G.729