Unify OpenScape CP600 - Deleting Key Programming

92
Deleting key programming
¬ or  If necessary switch to another level
Hold down the Function keys on the OpenScape Key Module 600 to be deleted
until the key programming menu is displayed.
or
@ If nec. Press Main Menu key.
Open using the Softkey.
Select desired page (1 to 4).
Switch to the second level if necessary.
Hold down the Function keys to be deleted.
€ Select "Assign telephone function"
Confirm.
€ Select "Key, delete"
Confirm. The key programming is deleted.
Confirm to end the process.
Disconnect -
_
Favorites
_
Favorites (1/2)
Page 1
Q
_
Level 2
-
_
Disconnect
˜
_
Assign telephone function
-
_
Key, delete
_
finishing
_