Unify OpenScape CP600 User Manual

67
Energy saving mode
Select the inactivity time after which the OpenScape CP 600 should automati-
cally dim or turn off the backlight.
You can select the following time combinations for backlight dim / switch off :
• 1 minute/5 minutes
• 5 minutes20 minutes
• 30 minutes/2 hours
• 45 minutes/4 hours
• 60 minutes/8 hours
z You can also configure this setting via the Web interface  page 217.
@ If nec. Press Main Menu key.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
€ Select "Phone".
Open using the Softkey.
Open using the Softkey
Open using the Softkey
1
.
€ Select the new time in the list
Using the Softkey, confirm the new background lighting settings.
Save the setting with the Softkey.
Service/Settings
_
$
User:
-
_
$
Phone
-
_
Energy saving mode
-
_
Enable after
5 minutes/20 minutes
K
_
1. The display shows the current setting
30 minutes / 2 hours
¥
_
Q
_

Unify OpenScape CP600 Specifications

General

Ethernet Ports	2 x 10/100/1000 Mbps
HD Voice	Yes
Display	Color TFT Display
Resolution	480 x 272 pixel
Connectivity	Gigabit Ethernet
Audio	HD Voice
Keys	4-way navigator key
Power	PoE (802.3af)
Protocols	SIP
Headset	EHS
USB Port	USB 2.0
Bluetooth	Optional
Supported Codecs	G.711, G.722, G.729