Unify OpenScape CP600 - Searching for Conversations or Contacts

39
Searching for conversations or contacts
There are several ways to search for conversations or contacts. If you know the telephone number,
you can,
lift the handset or
press the speaker key or
press the headset key
and begin entering the digits.
To search in your conversations list, open an alphanumeric input field by pressing the Softkey for
A,
or choose a purely numeric input field for the search by entering a digit.
Use the # key to switch from numeric to alphanumeric input when you have opened the search
field with the Softkey A. You can immediately dial a located subscriber whose phone number
contains the number 33 in this case, for example, by pressing the Softkey.
Search for...
Daniel Bernoulli
b Received call (1:35:50)
9:44
Andre-Marie Ampere
b Received call (45:56)
8:45
Georg Simon Ohm
Isaac Newton
33
Daniel Bernoulli
b Received call (1:35:50)
Andre-Marie Ampere
b Received call (45:56)
Georg Simon Ohm
Isaac Newton
30 May
30 May
30 May
30 May