Unify OpenScape CP600 - Using a Mobile Connection to a Different Phone; Mobility Variants

184
Using a mobile connection to a different
phone
You can configure a mobile connection that your relevant technician has set up
for you on a OpenScape CP 600 prepared for it on the system. The original
connection to the "guest phone" is deactivated. The mobile connection remains
available for as long as you are logged into the "guest phone".
Most of the functions and features (phone number, key assignment, authoriza-
tions) of your phone are available to you following login.
Mobility variants
There are two variants available for mobility:
• Basic
• Data privacy
Configuration is carried out by the technician.
Basic
When "logging on" to the "guest telephone", the following settings are transmit-
ted from the mobile connection:
• Key assignment
• Authorizations
• Call forwarding
In addition, outstanding messages or texts are signaled.
"Guest phone" conversations are visible and can be used.
The conversations you have made in the meantime are automatically deleted
from the phone following logging off.
Data privacy
When "logging on" to the "guest telephone", the following settings are transmit-
ted from the mobile connection:
• Key assignment
• Call forwarding
• Authorizations (apart from user password)
In addition, outstanding messages or texts are signaled. The user password is
not transferred, so you have to create a new password on the phone.
An empty conversation list is available to you which will be automatically deleted
again after logging off from this phone.