178
Other settings and functions
Connection costs
Display connection costs for your phone (not for U.S.)
For the current call:
Depending on the setting, call costs are displayed during or after the call.
Depending on the network provider, no-charge external calls will also be display-
ed. On the display, "no charge" appears before or during the call.
If no cost display is set up, the phone number dialed and/or the call length ap-
pear in the display.
For all calls and for the last call held
First the call charges for the last charged call are displayed. After five seconds
the connection charges incurred (total) are displayed.
@ If nec. Press Main Menu key.
Open using the Softkey.
Open with softkey.
€ Select "more features".
Open with softkey.
Confirm. The costs are displayed.
ñ
If the costs are to be displayed continuously during an outgoing call, this
function must be requested from the relevant Administrator of the net-
work operator.
The display of the call costs must be applied by the network operator and
configured by the relevant Administrator.
If a call is transferred, the costs are assigned to the phone to which the call
was transferred.
Service/Settings
_
Service menu
-
_
more features
-
_
Show call charges
_
To Next Page
Loading...
Need help?
General
