Unify OpenScape CP600 - Bluetooth Settings; Activating and Deactivating Bluetooth; Changing the Bluetooth Name of Your Openscape CP600

143
Bluetooth settings
Activating and deactivating Bluetooth
z You can also configure this setting via the Web interface  page 217.
@ If nec. Press Main Menu key.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
Activate with the Softkey. The Bluetooth function is activated and is now availa-
ble.
Save the setting by selecting the Softkey.
Changing the Bluetooth name of your OpenScape
CP600
Here you can determine which name your OpenScape CP600 should use to re-
gister at other Bluetooth devices.
z You can also configure this setting via the Web interface  page 217.
@ If nec. Press Main Menu key.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey
Open using the Softkey
ñ
The Bluetooth function was activated for your phone by the administrator.
Service/Settings
_
$
User:
-
_
$
Bluetooth
-
_
Configuration
-
_
Active
¦_
Q
_
By factory default, the Bluetooth name is: IntegratedPhone.
If you are currently in the Bluetooth configuration, then the phone is visible.
If you exit the menu, it will be hidden again after a short time.
Service/Settings
_
$
User:
-
_
$
Bluetooth
-
_
Configuration
-
_