Unify OpenScape CP600 - Setting Headset Port Use

78
Setting headset port use
z You can also configure this setting via the Web interface  page 217.
@ If nec. Press Main Menu key.
Open using the Softkey.
Open using the Softkey
if nec. j Enter and confirm the User password.
Open using the Softkey
Open using the Softkey.
€ Select the headset port.
Open using the Softkey
1
.
You will be offered the following options:
• Wired headset
• Cordless headset
• Conference device
Confirm with the Softkey to switch.
Save the setting with the Softkey.
Service/Settings
_
$
User:
-
_
$
Audio
-
_
Settings
-
_
Headset port
K
_
1. The display shows the current setting
Wired headset
ä
_
Q
_