Unify OpenScape CP600 - Call Settings; Rejecting;Accepting Second Calls (Call Waiting); Activating;Deactivating Call Waiting

81
Call settings
Rejecting/accepting second calls (call waiting)
If configured (ask relevant technician), you can reject/accept automatic call wai-
ting signaling for a second call  page 116 during a telephone conversation.
@ If nec. Press Main Menu key.
Open using the Softkey.
Open using the Softkey.
select the option shown.
€ Select "Automatic call wait off"
and confirm,
or
select and confirm the option shown.
Activating/deactivating call waiting
You can suppress call waiting for a second call (approx. every six seconds). A
special tone alerts you to the second call.
Activating signal tone
@ If nec. Press Main Menu key.
Press the Softkey .
Switching off signal tone
@ If nec. Press Main Menu key.
Press the Softkey .
Service/Settings
_
Service menu
-
_
Switches
-
_
Automatic call wait off
Q
_
Automatic call wait on
Q
_
Waiting tone on
Q
_
Waiting tone off
Q
_