Unify OpenScape CP600 - Saving Personal Lock Code

173
Saving personal lock code
For the functions
• Locking the phone to prevent misuse  page 171
• Using a different phone in the same way as your own  page 183
in order to assign, you must enter a personal code which you can define your-
self.
@ If nec. Press Main Menu key.
Open using the Softkey.
Open with softkey
€ Select "PIN and license of service".
Open with softkey.
Confirm.
Request for current code.
j Enter current 5-digit code.
If you have still not assigned a code, on first input use "00000".
Request for new code.
j Enter the new code.
Request for repetition of the new code
j Re-enter the new code.
Service/Settings
_
Service menu
-
_
PIN and license of ser- -
_
Change lock code
_
previous code:
new code:
Please repeat:
ñ
If you have forgotten your code, contact the relevant Administrator for
help. Your PIN can be reset to "00000".