88
or If you have mistyped:
Select and confirm. All entered digits will be deleted.
Re-enter the value and save the result.
Selected dialing key configuration
If you want to configure a selected dialing key on the second level of the
OpenScape Key Module 600, you can switch to this level beforehand.
¬ or  Switch to the second level if necessary.
Hold down the Function keys on the OpenScape Key Module 600 to which a
function is to be assigned until the key programming menu is displayed.
or
@ If nec. Press Main Menu key.
Open using the Softkey.
Select desired page (1 to 4).
Switch to the second level if necessary.
Press and hold the Function keys to be programmed.
Confirm.
Confirm the option shown
j Enter the phone number and confirm.
Save the setting with the Softkey. The key is programmed.
back
_
Select the saved procedure with a keystroke.
For procedures with on/off functions, switch the function on with a keystro-
ke and off again with another.
You can also operate procedure keys during a call; the saved figures are
automatically sent as DTMF signals ïƒ page 123. Display notifications du-
ring procedure saving ïƒ page 100.
_
Favorites
_
Favorites (1/2)
Page 1
Q
_
Level 2
-
_
_
Editing selected dialing -
_
Number
-
_
Q
_
To Next Page
Loading...
Need help?
General
