142
Only a Function keys with a function configured can be selected to be triggered
by the Bluetooth Remote button click. All unallocated keys are hidden.
Function keys s from any attached Key Module are potentially available to be se-
lected. No shifted level keys can be selected.
The “Configure remote button” screen now shows the label for the Function keys
that has been configured to be triggered by this Bluetooth Remote button device.
Trigger on reconnect
If the Bluetooth Remote button is disconnected (e.g. the device is in energy sa-
ving mode) and you want to reconnect it, the following may happen based on the
settings of the functionality “Trigger on reconnect”.
• If enabled, the remote button will connect and trigger the configured Function
key at the same time. You need to press the Remote button only once.
• If disabled, you need to press the Remote button twice. First time it will re-
connect and second it will trigger the configured Function key.
Configure remote button - Selfie
Aktivieren
Auswählen key
Visual alert
Trigger on reconnect
Security alert
Configure remote button - Selfie
Aktivieren
Auswählen key
Visual alert
Trigger on reconnect
Security alert
To Next Page
Loading...
Need help?
General
