Unify OpenScape CP600 - Configuring the Connection to UC; UC Journal

209
Configuring the connection to UC
To use the Presence settings  page 79, you must be logged in to the UC ser-
ver.
z You can also configure this setting via the Web interface  page 217.
@ If nec. Press Main Menu key.
Open using the Softkey
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
Open using the Softkey.
Open using the Softkey.
j Enter your name used for OpenScape Business and conclude your input with
the Softkey.
Open using the Softkey.
j Enter your password used for OpenScape Business and conclude your input
with the Softkey.
Save the entries. You can now use the settings for UC  page 79.
UC Journal
You can access your UC Journal on your phone so you have the same list as on
your other UC clients. The Conversations will be downloaded directly from the
UC server and local conversation list will be replaced. As the Conversation list
is controlled by UC server, there is no option to delete conversation or all con-
versations locally on phone.
z You can also configure this setting via the Web interface  page 217.
@ If nec. Press Main Menu key.
Open using the Softkey
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Service/Settings
_
$
User:
-
_
$
Configuration
-
_
Existing connections
-
_
UC settings
-
_
UC user name
K
_
UC password
K
_
Q
_
Service/Settings
_
$
User:
-
_
$
Configuration
-
_