Unify OpenScape CP600 - Page 159

159
Deactivate call forwarding
@ If nec. Press Main Menu key.
Open using the Softkey.
Open with softkey.
Open with softkey.
€ Select "Frwrdng. MULAP off".
Confirm.
Press the required line key.
or
j
Enter the desired line/trunk number.
or
If available, press the key.
Understanding LED notifications for the key "MULAP forwarding"
LED on the "Fwd. MULAP" is dark – no call forwarding active for this line.
or
LED on the "Fwd. MULAP" lights up – call forwarding active for this line.
or
LED on the "Fwd. MULAP" flashes slowly – line is the destination of a forwarded
call.
Service/Settings
_
Service menu
-
_
Destinations
-
_
Frwrdng. MULAP off
_
Ln.
-
¤
Fwd. MULAP -
¤
If call forwarding is activated for a line, a special dial tone rings when oc-
cupied.
Fwd. MULAP -
_
Fwd. MULAP -
¤
Fwd. MULAP -
£