User's Guide ______________________________________________________________________
102 _________________________________________________________________ M211296EN-A
Connecting AWS Client to AWS330
Installing USB Driver
If you are using a computer that does not have a RS232 serial port, such
as most laptops, a USB to RS232 converter cable is provided for using a
local connection to the AWS330 system. Install the driver for the cable as
follows:
1. Insert Vaisala USB Instrument Driver CD to CD/DVD drive of
your PC.
2. If the installation program is not started automatically, start it from
the CD root directory, program setup.exe.
3. Follow the instructions given by the installation program.
4. When the driver installation is complete, connect the USB cable to
a free slot on your PC. Allow the operating system to detect the
driver for the cable automatically.
5. To check which port has been assigned for the USB serial port,
launch program Vaisala USB Instrument Finder from the Start
menu.
1012-209
Figure 56 Finding Port Number for USB Serial Port
To Next Page
Loading...
