Chapter 6 ______________________________________________________________Maintenance
VAISALA______________________________________________________________________ 203
Copying a New AWS330 Software from CF Memory
Card
As an alternative for updating AWS330 software through the serial port
using loader.exe you can receive a pre-programmed CF (CompactFlash)
card from Vaisala including the latest software to be copied. Each time
AWS330 starts up, the boot software checks if a new software is
available for loading on the CF card.
To copy a new software into AWS330, proceed as follows:
1 Insert the CF card received from Vaisala into the CF card slot in
the QML logger.
2. Launch copying the new software by issuing the command
SWLOAD.
3. The AWS330 software checks that the boot code is valid and the
CF includes Motorola's S-record at the specified address. The
firmware also checks that the CF card is formatted and that there is
a file on it named bin.mot.
4. When the application has been copied, the QML logger restarts
automatically.
5. If SWLOAD refuses to copy the new software, the CF card does
not include a valid software.
6. When the new application has been restarted, take the CF card out
of the QML logger and store it for future use.
To Next Page
Loading...
