Chapter 6 ______________________________________________________________Maintenance
VAISALA______________________________________________________________________ 165
CHAPTER 6
MAINTENANCE
This chapter provides information that is needed in the basic maintenance
of AWS330.
Overall Checking
Check the mechanics and cabling for any damage and corrosion, and
repair if needed. Wipe off or remove excess dirt, dust, sand, or leaves.
- Check signal and main cables, connectors, and connections.
- Check gaskets of the enclosures.
- Check all grounding cables, lugs, and so on.
- Check mechanical assemblies, bolts, nuts, and so on.
- Check the equipment for corrosion. Repair if needed.
CAUTION
Do not open the enclosure under poor conditions, for example, during
rain or with dust in the air. In general, it is not advisable to repair sensors
in the field.
NOTE
Use correct tools of good quality.
To Next Page
Loading...
Need help?
General
