User's Guide ______________________________________________________________________
136 _________________________________________________________________ M211296EN-A
Alarms
The following parameters provide limits for preconfigured alarms:
1012-168
Figure 81 Setting Alarm Limits
Table 35 Alarm Limit Parameters
Monitored Value Unit Alarm Set Name Limit Type Default Limit
Air temperature instant °C High limit TA_AlarmHigh high_limit 40
Air temperature instant °C Low limit TA_AlarmLow Low_limit 0
Wind speed max 10 min m/s High limit WS_Alarm high_limit 20
Precipitation sum 1 hour mm High limit PR_Alarm high_limit 20
Datalogger temperature °C High limit None Fixed +65 °C 65
Datalogger temperature °C Low limit None Fixed -65 °C -65
Datalogger supply voltage VDC Low limit DC_Alarm Low_limit 10.5
To enable transmission of alarm message with the selected media, use
one of the options described in Table 25 on page 121.
To Next Page
Loading...
Need help?
General
