Chapter 5 __________________________________________ Software Configuration and Operation
VAISALA______________________________________________________________________ 131
Telemetry Parameters
Settings in the following sections are used to set telemetry parameters
depending on the type of telemetry device used (GSM, Ethernet) and the
selected protocol.
Connection Parameters
GSM Modem
Before starting to set up the GSM modem, you need to obtain a SIM
card.
NOTE
Even if using a PIN code is optional, it is recommended that you use it to
protect the SIM from unauthorized use. Use a mobile phone to set the
PIN.
The following parameters are available for GSM modem:
1012-165
Figure 78 Setting GSM Modem Parameters
Table 31 GSM Modem Parameters
Set Name Parameter Name Use
GSM_Modem pin PIN code set to SIM card. Leave empty if
not used.
GSM_Modem smscentre Number for operator's SMS centre.
(1
(1
Parameter is optional. Needed only if using SMS and the network does
not provide this information automatically.
To Next Page
Loading...
Need help?
General
