User's Guide ______________________________________________________________________
190 _________________________________________________________________ M211296EN-A
The following numbers refer to Figure 112 on page 191:
1 = Cup wheel assembly
2 = Hex nut of the connector
3 = M6x16 DIN7991 (3 pcs)
4 = Lower body
5 = Spacer (3 pcs)
6 = Printed circuit board (PCB)
7 = Chopper disc
8 = External retaining ring, body
9 = Spacer ring
10 = Internal retaining ring, shaft
11 = Ball bearings
12 = Shaft and Upper body assembly
13 = Ball bearings
14 = O-rings, 2 pcs
To Next Page
Loading...
