3. The sensor should now be inside retractor and about 140 mm (5.5 in) of the screw
thr
ead should stick out of the middle of the wheel.
a. Unlock the latch on outer casing.
b
. Take a firm hold of the handwheel and handle and lift retractor (with sensor) over
the isolation valve flange. Keep handle up.
4. Rotate outer casing 60° clockwise to lock the bayonet (1), and lock the outer casing
latch (2).
PR-23 Series User Guide
IM-EN-PR23-E
192
To Next Page
Loading...
