Vaisala PR-23 Series User Manual

4.2.7 Reset button
You can reset and restart both the indicating transmitter DTR and the sensor by pushing the
r
eset button. You can access the button through the cable hole in the front panel shield as
shown in the following figure. To reach the reset button, use a thin stick or similar utensil,
preferably of non-conducting material. After pushing the reset button, the display blacks out
for a few seconds. The instrument returns to full operation within 30 s.
Reset
button
Figure 11 Location of reset button
PR-23 Series User Guide
IM-EN-PR23-E
36

Vaisala PR-23 Series Specifications

General

Brand	Vaisala
Model	PR-23 Series
Category	Measuring Instruments
Language	English