8. Calibrate the front wheel turning angle:
The fault indicator light blinks four times every 2 seconds and the indicator
light in the on/off button is lit.
GUID-F4CEB8B0-0C53-4069-8F21-9F8676ABCE71
1. Steering wheel
2. Fault indicator light and button
• Turn the steering wheel slowly to left extreme position.
• Turn the steering wheel slowly to right extreme position.
• Turn the steering wheel slowly to centre position.
• Press the fault indicator button to save the front wheel turning angle
calibration.
9. Calibration is completed.
If the calibration has been successful, the indicator lights go out and the
Valtra LHLink deactivates.
If the calibration has been unsuccessful, perform the calibration again. If the
calibration is still unsuccessful, contact an authorised Valtra workshop.
4. Maintenance
- 469 -
To Next Page
Loading...
