Number Touch Key Functional Description
8 Search Icon Open the keyboard to search for controls and setting locations.
9 Date/Time Shows the current date and time.
10 Lock/Unlock Icon
Indicates whether or not the user and service options are accessible.
• Locked icon: display is read-only
• Unlocked icon: user or service is logged-in and options are accessible
11 Secondary Content Panel
When accessing settings/configuration via the menus, the settings display in the right, secondary
panel.
12
Summary of Current Unit
Function
Customize to show fan speed, cooling, percentages from any installed device, and any physical
(sensor) values.
13 Status Dial Circular display of setpoints and environmental conditions of the unit.
14 Teamwork Mode Icon In a panel with "Status" content, the Teamwork Mode icon indicates the mode selected.
15 Control Header Controls to access the user and service menus.
16 Status Header Displays the alarm status, unit identification, and the current date and time.
Table 7.9 CR019 Display Screen (continued)
To power on the unit:
1. From the HMI display, click USER , then click the three horizontal lines.
2. Click Turn Unit On. A dialogue box appears.
3. Click Turn Unit On again. The cooling unit starts and the operating status is displayed.
To power off the unit:
1. From the HMI display, click USER , then click the three horizontal lines.
2. Click Turn Unit Off. A dialogue box appears.
3. Click Turn Unit Off again. The cooling unit stops and the operating status is displayed.
To configure the cooling unit:
1. From the HMI display, click USER , then click the three horizontal lines.
2. Click Setpoints - Temperature Control. The Temperature Control Panel opens, as shown in the following figure.
68 Proprietary and Confidential ©2024 Vertiv Group Corp. 7 Network Settings
Vertiv™ SmartRow™ 2 Infrastructure Solution User Guide
To Next Page