EasyManua.ls Logo

Vicon VDR-704C - 1 Product Features; Front Key Functions

Vicon VDR-704C
146 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
Chapter 1. Product Features
The relevant feature availability is subject to product classification/model.
1.1. Front Key Functions
1. Numeric button : This button is to be used for inputting network IP address, password (on dialog box display)
and channel selection on live mode or playback mode.
2. LED Display
POWER : System Standby Mode > Red LED light, System in Operation > Green LED light.
REC : Green LED light is flickering when recording.
ALARM : Green LED light is on when alarm is activated.
HDD FULL : Green LED light is on when there's no further space left on hard disk for recording.
PTZ : Green LED light is on when PAN, TILT, ZOOM, FOCUS modes are activated.
3. Front USB port : This USB port is to be used to back up the video data, or captured still image from HDD. Also
this USB port supports USB mouse controlling for easy DVR operation with front input location advantage.
4. Function Key
POWER : This is to turn on and off the system power. Unimo DVR has Soft-Power solution that when
pressing "Power" button, you're asked to input Password to shut down the power for security reasons. (The
prevention of user's mistake - You can select it from the menu)
LOCK : This is to prevent any unwanted system manipulation by unauthorized personnel. Pressing this key
one time, DVR turns into locking status. Afterward any key touch will call up the password input dialog box.
Key lock will be released only when you input the correct password.
ZOOM : This is to be used to zoom in, or zoom out the specific display area on live mode.
FRZ(Freeze) : This is to pause the display screen on live mode. Pressing this key button one more time lets
you go back to previous mode.
MISC/SH
MISC(Miscellaneous) : This key supports the missing key buttons that are available on remote controller.
(i.e. NET, OSD, Audio, Mute, HDD, Log)
SH(Shuttle Hold) : The user can run speedy playback by using jog shuttle. (Without specific shuttle
controlling, this key enables you to set and keep the playback speed running at your own)
SEARCH : This is to search the video data files that are recorded on HDD.
PTZ(Pan/Tilt/Zoom) : This key button allows you to enter Pan/Tilt/Zoom/Focus mode. Pressing this key
button one more time lets you go back to previous live display mode.
MENU : This is to initiate the System Configuration Menu. If you are already in progress of several steps
of menu control, this key lets you go back to previous upper menu.
MULTI
16CH DVR

Table of Contents