PC Client Introduction
120
• As all the selected E-Map Group is all connected, you can verify the real-time DVR status by selecting
the relevant E-Map within its Group.
2. E-Map Full View
• By using the right button on the mouse, the user can call up, or hide the E-Map list window.
3. Viewing with Live Video
• The real-time live screen will be displayed together by double-clicking the camera location.
• The live screen size can be controlled by the user.
4.10. MobileViewer
4.10.1. Contents
• MobileViewer is displaying the JPEG streaming data, not H.264 streaming data from the DVR.
• This is to set up FPS on JPEG data.
• Please set up and configure the Menu/NetworkSetup/JPEG fps values as per your requirement.
• This is to set up the DVR network so that you can connect to WLAN/LAN from PDA.
• To check if JPEG data streaming is coming from DVR, you can verify it by setting "Stream Type" on RAMS
Setup menu as JPEG format.
• After finishing DVR settings, you can download the corresponding Mobile Viewer programs on to your current
Mobile Device.
• Current Unimo DVR supports the following Platform.
• Windows Mobile 5.0 Pocket PC (ARMV4I)
• Windows Mobile 5.0 Smartphone (ARMV4I)
• Windows Mobile 6 Professional (ARMV4I)
• Windows Mobile 6 Standard (ARMV4I)
• Now the downloaded Mobile Viewer is to be executed.
4.10.2. Using MobileViewer
1. Menu Configuration
• Connect
• Connect - You may add or select the DVR to connect.
• Disconnect - This is to terminate the currently connected DVR.
• Channel - This is to change the connected DVR channel.
• PTZ Control - You may control the connected DVR's PTZF.
• DVR Information - This is to verify the currently connected DVR's information.
• About MobileViewer - This is to verify the MobileViewer's version information.
2. Connecting the DVR
To Next Page
Loading...