Vicon VDR-704C - FTP Trigger Setup; Target Directory of FTP Server

Main Menu Configuration
24
3.3.5.4. Target Directory of FTP Server
Figure 3.21. Target Directory of FTP Server
This is to input directory name to save video data on FTP server.
3.3.5.5. The length of video data (second) to transfer to FTP server.
This is to input the length of video data (second) to transfer to FTP server, when the event took place.
3.3.5.6. The type of video data to transfer to FTP server.
When the even took place, the user can select the video data type to transfer to FTP server. Currently JPEG H.264
video data is being supported.
3.3.6. FTP Trigger Setup
If an event took place from a certain channel, the user can determine and set up if the video data is to be transferred
to FTP server.
Figure 3.22. FTP Trigger Setup
The user can set up ON or OFF per channel for sensor event, or for motion event.