Main Menu Configuration
37
Back up
This is to set up whether the relevant user can back up the data.
3.7.2.1.2. Password Change
In case of changing the password, the exisiting password has to be verified in advance. Once the password is
correct, then the new password can be set when the 2 times of new password input is synchronized. System
passowrd can be configured from no. 1 to 8 with total 6 numeric digits.
Figure 3.43. Password Input Screen
3.7.2.1.3. Password Application
For each content, system password application option can be set up by ON / OFF. Password application contents
are recording termination, menu entrance and system power off. For these 3 contents, the user can set up password
application respectively. When it's selected ON with password application, every time the relevant content is called
up, then the password verification process will be in effect and when it's selected OFF, password verification will
not be implemented in any case.
3.7.2.2. Automatic Key Lock
When there's no key input for a certain time, automatic key lock application and stand-by time option set up is
required. If this value is OFF, automatic key lock function will not be implemented. Possible setup time is 30 sec,
1 min, 3 min, 5 min, 10 min. When the setup is completed, then the automatic key lock will be activated and the
key shape icon is to be displayed on the bottom of the screen. In case of key lock status, password input window
will be displayed when any key button is pressed. Entering system password will lead lock-free status and the
system is available for further use.
3.7.3. Date and Time
The user can set up system time and date and this menu is for time/date display format and NTP relevant function
setup.
Figure 3.44. Date and Time Setup Screen
To Next Page
Loading...