Main Menu Configuration
51
3.12.1.3.3. Playback Speed Control
Playback speed is available with forwarding slow 2 steps, forwarding normal, forwarding faster 7 levels, reverse
normal, reverse faster 7 levels. If the user wants the faster playback from current playback speed, the user can
control the speed by using RIGHT button on front panel of DVR or remote controller, and if the user wants the
slower playback from current playback speed, the user can control the speed by using LEFT button.
3.12.1.3.4. Playback Direction Change
Playback direction is for reversed playback and forwarding playback. If the user wishes to change the forwarding
playback to reversed playback direction, then he can press R-PLAY(Reverse Play) button. When this button is
pressed, then the reversed playback starts. On the contratry, if the user wishes to turn the direction from the
reversed playback to forwarding playback, then he can press PLAY button. Once this button is pressed, forwarding
playback will start.
3.12.1.3.5. Playback Channel Selection
This is to select the different channel on the same time zone during playback. In case of selecting different channel
by using remote controller, the user can select the preferred channel by remote controller. However, in case of
channel no. 1, the user can press number 1 and wait for about 3 seconds, or press OK button. By using the channel
button on the front panel of DVR will promote the user's convenience in channel selection.
3.12.1.3.6. Audio ON / OFF
When the recorded video data playback carries audio sound, the user can use the MUTE button to turn the audio
ON / OFF. Audio playback ON / OFF status is to be displayed as icon on top of the screen.
3.12.1.3.7. Repeat Range Setup Function
During the playback, by using “SEQ” key button, repeated playback on specific section (or, interval) is available.
During the playback, when “SEQ” key button is pressed once, “A-” is to be displayed on the right bottom of screen
and when “SEQ” key button is pressed one more time, “A-B” is to be displayed and it starts repeated section
playback.
During the repeated playback on specific section, when the user presses “SEQ” button, or changes the direction
or speed, repeated playback is to be turned off.
3.12.1.3.8. Backup Time Setup Function
During the playback, the user can use “REC” key button to designate the backup starting and ending time.
During the playback, when “REC” key button is pressed, “S-” is to be displayed on the right bottom of the screen
and when “REC” key button is pressed one more time, “S-E” is to be displayed to mark the backup starting and
ending time.
The designated starting and ending time can be used on “Backup” menu.
3.12.2. Still Image Playback
3.12.2.1. Playback Method
After moving the cursor to the list that user wishes to run playback from the searched paused video list, once OK
button is pressed, then the search list screen will disappear and paused video playback will start.
To Next Page
Loading...