PC Client Introduction
83
• 8x8 screen configuration button : This is to switch the current screen to 8x8 screen.
• Previous Page : This is to switch the current page to the previous page.
• Next Page : This is to switch the current page to the next page.
• Search : DVR's recorded data is displayed on the calendar. By selecting the wished time frame and run the
network playback.
• Backup : DVR's recorded data is displayed on the calendar. By selecting the wished time frame, you can back
up the recorded data to the PC.
• DVR setting : This is to connect the program (QuickInstaller) that can set up the DVR values via network or
serial port.
• Still Image Saving : This is to save currently played images into JPG file.
• PTZF control : This is to be activated only on the single channel and the PTZF controllable dialog is to be
popped up.
• Environment Setting : This is to set up the Multiviewer program's environment.
• OSD : This is to set up if the OSD is to be displayed.
• Program Information : This shows the program version information.
• Page Information : This is to show you the current page information.
• Min. button : This is to minimize the Multiviewer program.
• Program movement : By using this button, the user can move the program betwen the monitors when using
multi-monitors are used.
• Program Termination : This is to terminate Multiviewer program.
To Next Page
Loading...