WAGO I/O-SYSTEM 750 User Manual

130 Commissioning WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
</dg_
7.6.1.22 “Mass Storage” Page
A group containing information about the storage volume is displayed for each
storage volume that is found, along with an additional group for formatting (when
this is possible).
The group title contains the designation for the storage volume (“SD card” or
“Internal Flash”) and, if this storage volume is also the active partition, the text
“Active Partition”.
7.6.1.22.1 “<Device Name>” Group(s)
Table 72: WBM “Mass Storage” Page – “<Device Name>” Group
Parameters
Explanation
Device
The name of the storage volume in the operating
system file system is displayed here.
Volume name
The name of the storage volume is displayed here.
7.6.1.22.2 “<Device Name> - FAT Format” Group(s)
Table 73: WBM “Mass Storage” Page – “<Device Name>” Group
Parameters
Explanation
Volume Name
Specify the name for the storage volume when
formatted.
Data are deleted!
Any data stored in the storage volume is deleted during formatting!
To format the specified storage volume, click [Start Formatting].

WAGO I/O-SYSTEM 750 Specifications

General

Brand	WAGO
Model	I/O-SYSTEM 750
Category	I/O Systems
Language	English