WAGO I/O-SYSTEM 750 User Manual

162 Commissioning WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
7.6.4.3.12 “PLC Runtime” > “WebVisu” Submenu
This submenu contains information and settings for the Web visualization.
Table 122: “PLC Runtime” > “WebVisu” Submenu
Menu Item
Submenu Item / Explanation
0. Back to …
Back to the higher-level menu
1. CODESYS 2 Webserver
State
The status of the CODESYS 2 Webserver is
displayed.
2. Default Webserver
Choose here whether the Web-based Management or
web visualization of the runtime system should be
displayed when only entering the IP address of the
controller.
0. Back to …
Back to the higher-level menu
1. Web-based
Managem
ent
The Web-based Management is
displayed.
2. CODESYS
WebVisu
The web visualization of the runtime
system is displayed.
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].

WAGO I/O-SYSTEM 750 Specifications

General

Brand	WAGO
Model	I/O-SYSTEM 750
Category	I/O Systems
Language	English