WAGO I/O-SYSTEM 750 User Manual

WAGO-I/O-SYSTEM 750 Commissioning 179
750-8208 PFC200 CS 2ETH RS CAN DPM
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
7.6.4.7 “Administration” Menu
This menu contains settings for controller administration.
Table 146: “Administration” Menu
Menu Item
Submenu Item / Explanation
0. Back to …
Back to the higher-level menu
1. Users
Opens a submenu with settings for the user
passwords
2. Create Image
Opens a submenu for creating a bootable image
3. Owner of Serial Interface
Select the serial interface assignment.
0. Back to …
Back to the higher-level menu
1. Linux
Console
The serial interface is assigned to the
Linux
®
console.
2. Un-
assigned
The serial interface is not assigned
and is available for applications or
CODESYS.
4. Reboot Controller
Restart the controller following a security challenge.
0. Back to …
Back to the higher-level menu
1. Reboot
Restarts the controller
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].

WAGO I/O-SYSTEM 750 Specifications

General

Brand	WAGO
Model	I/O-SYSTEM 750
Category	I/O Systems
Language	English