WAGO I/O-SYSTEM 750 User Manual

WAGO-I/O-SYSTEM 750 Commissioning 169
750-8208 PFC200 CS 2ETH RS CAN DPM
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
7.6.4.4.13 “Ethernet Ports” > “Interface Xn” Submenu
This submenu contains the settings for the selected ETHERNET interface.
Table 136: “Networking” > “Ethernet” > “Ethernet Ports” > “Interface Xn” Submenu
Submenu
Submenu Item / Explanation
0. Back to …
Back to the higher-level menu
1. Port
Set here whether the selected port is to be used.
0. Back to …
Back to the higher-level menu
1. Disabled
The port is not used.
2. Enabled
The port is used.
2. Autonegotiation
Set here whether the Autonegotiation function is
enabled for the selected port.
0. Back to …
Back to the higher-level menu
1. Disabled
Autonegotiation is disabled.
2. Enabled
Autonegotiation is enabled.
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].

WAGO I/O-SYSTEM 750 Specifications

General

Brand	WAGO
Model	I/O-SYSTEM 750
Category	I/O Systems
Language	English