WAGO I/O-SYSTEM 750 User Manual

WAGO-I/O-SYSTEM 750 Commissioning 201
750-8208 PFC200 CS 2ETH RS CAN DPM
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
7.6.4.12.5 “SNMP” > “(Secure)SNMP firewalling” Submenu
These submenus contain the SNMP firewall settings.
Table 181: “SNMP” > “(Secure )SNMP firewalling” Submenu
Menu Item
Submenu Item / Explanation
0. Back to …
Back to the higher-level menu
1. VPN
Enable or disable the firewall for the VPN interface
and respective service.
0. Back to …
Back to the higher-level menu
1. open
Data traffic via the VPN interface is
permitted.
2. close
Data traffic via the VPN interface is
not permitted.
2. WAN
Enable or disable the firewall for the WAN interface
and respective service.
0. Back to …
Back to the higher-level menu
1. open
Data traffic via the WAN interface is
permitted.
2. close
Data traffic via the WAN interface is
not permitted.
3. X1
Enable or disable the firewall for the X1 interface
and respective service.
0. Back to …
Back to the higher-level menu
1. open
Data traffic via the X1 interface is
permitted.
2. close
Data traffic via the X1 interface is not
permitted.
4. X2
Enable or disable the firewall for the X2 interface
and respective service.
0. Back to …
Back to the higher-level menu
1. open
Data traffic via the X2 interface is
permitted.
2. close
Data traffic via the X2 interface is not
permitted.
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].

WAGO I/O-SYSTEM 750 Specifications

General

Brand	WAGO
Model	I/O-SYSTEM 750
Category	I/O Systems
Language	English