WAGO I/O-SYSTEM 750 User Manual

174 Commissioning WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
7.6.4.5.3 “Firewall” > “MAC Address Filter” Submenu
This submenu contains the settings for the MAC address filter.
Table 140: “Firewall” > “MAC Address Filter” Submenu
Menu Item
Submenu Item / Explanation
0. Back to …
Back to the higher-level menu
1. MAC address filter
whitelist
Opens a submenu to edit the MAC address filter
whitelist
2. MAC address filter state
VPN
Enable or disable the firewall for the VPN interface.
0. Back to …
Back to the higher-level menu
1. Open
The firewall for the VPN interface is
disabled.
2. Filtered
The firewall for the VPN interface is
enabled.
3. MAC address filter state
WAN
Enable or disable the firewall for the WAN interface.
0. Back to …
Back to the higher-level menu
1. Open
The firewall for the WAN interface is
disabled.
2. Filtered
The firewall for the WAN interface is
enabled.
4. MAC address filter state
X1
Enable or disable the firewall for the X1 interface.
0. Back to …
Back to the higher-level menu
1. Open
The firewall for the X1 interface is
disabled.
2. Filtered
The firewall for the X1 interface is
enabled.
5. MAC address filter state
X2
Enable or disable the firewall for the X2 interface.
0. Back to …
Back to the higher-level menu
1. Open
The firewall for the X2 interface is
disabled.
2. Filtered
The firewall for the X2 interface is
enabled.
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].

WAGO I/O-SYSTEM 750 Specifications

General

Brand	WAGO
Model	I/O-SYSTEM 750
Category	I/O Systems
Language	English