WAGO I/O-SYSTEM 750 User Manual

WAGO-I/O-SYSTEM 750 Appendix 433
750-8208 PFC200 CS 2ETH RS CAN DPM
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
Table 316: Description of the Configuration Scripts for “CODESYS”
Parameters
Status
Call
Output/Input
Effecti
ve
Information
CODESYS
Webserver
Version
read
get_coupler_details
codesys-Webserver-
version
Version of the CODESYS
Webserver
Immedia
tely
Project Details
Date read
get_rts_info
project date
Display of the project
information specified in
CODESYS (Menu > Project >
Project Information)
Immedia
tely
Title read
get_rts_info
project title
Immedia
tely
Version read
get_rts_info
project version
Immedia
tely
Author read
get_rts_info
project author
Immedia
tely
Description read
get_rts_info
project description
Immedia
tely
CODESYS State
State read
get_rts_info
state
Display of the CODESYS status
(RUN or STOP)
Immedia
tely
Home Directory (Boot Project Location)
Home
Directory
(Boot Project
Location)
read
get_runtime_config
homedir-on-sdcard
Storage logation for the home
directory.
Possible return values:
- enabled: The home directory
is on the SD card.
- disabled: The home directory
is on the boot medium.
After
restart
write
config_runtime
homedir-on-
sdcard=<Wert>
Storage logation for the home
directory.
Possible entries for the value are:
- enabled: Put the home
directory on the SD card.
- disabled: The home directory
is on the boot medium.

WAGO I/O-SYSTEM 750 Specifications

General

Brand	WAGO
Model	I/O-SYSTEM 750
Category	I/O Systems
Language	English