WAGO I/O-SYSTEM 750 User Manual

WAGO-I/O-SYSTEM 750 Commissioning 189
750-8208 PFC200 CS 2ETH RS CAN DPM
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
7.6.4.11.3 “Ports and Services” > “FTPS” Submenu
This submenu contains the settings for the FTPS service.
Table 161: “Ports and Services” > “FTPS” Submenu
Menu Item
Submenu Item / Explanation
0. Back to …
Back to the higher-level menu
1. State
Enable/disable the FTPS service.
0. Back to …
Back to the higher-level menu
1. Enable
The FTPS service is enabled.
2. Disable
The FTPS service is disabled.
2. Firewall status
Opens a submenu with firewall settings for the this
service for the interfaces
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
7.6.4.11.4 “Ports and Services” > “HTTP” Submenu
This submenu contains the settings for the HTTP service.
Table 162: “Ports and Services” > “HTTP” Submenu
Menu Item
Submenu Item / Explanation
0. Back to …
Back to the higher-level menu
1. State
Enable/disable the HTTP service.
0. Back to …
Back to the higher-level menu
1. Enable
The HTTP service is enabled.
2. Disable
The HTTP service is disabled.
2. Firewall status
Opens a submenu with firewall settings for the this
service for the interfaces
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].

WAGO I/O-SYSTEM 750 Specifications

General

Brand	WAGO
Model	I/O-SYSTEM 750
Category	I/O Systems
Language	English