Watlow F4T

Watlow F4T Controller • 48 • Chapter 3 Using the F4T Front Panel
5. Push each page (through 4) in which loop information will be displayed.
In the graphic that follows, each page has been configured to display from 1 to 4 loops on
each page.
6. Define the content blocks (number of loops) that will be displayed on each page.
Redefining page 1 to display two loops (content blocks):
1. From any screen, push the Menu button.
2. Push Personalize.
3. Push Basic Personalization.
4. Select the desired Home Layout by pushing Main Top, Main Center or Main Bottom.
5. Push Page 1.
6. Select two content blocks.