Watts AERCO Edge [ii] User Manual

Edge [ii] Controller Operation Manual
SECTION 2: EZ SETUP
OMM-139_E • 8/25/2020 Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST Page 30 of 196
Figure 2.3.1-4: BST Client: Client Communication Screen
6. If a previous setup was created and saved, the Load Settings screen appears. If you want
to re-load that setup, press Yes and see Section 2.5: EZ Setup – Restoring a Previous
Setup for instructions. Press No to proceed to the next step.
Figure 2.3.1-5: BST Client: Load Settings Screen
7. When you pressed No on the previous screen, the Client EZ Setup Complete screen
appears indicating completion or failure (if it failed, you can press Next to re-run the setup).
This screen includes a reminder that BST Cascade Setup must be run on the BST Manager.
Figure 2.3.1-6: BST Client: Client EZ Setup Complete Screen

Watts AERCO Edge [ii] Specifications

General

Brand	Watts
Model	AERCO Edge [ii]
Category	Controller
Language	English