上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
46 / 131
– Do the following:
1. Click Object → Rotate.
2. Left click to select the rotation center.
3. Move the cursor to adjust the rotation angle and left click to
confirm.
4.3.3 Align Objects
This operation is used to arrange the objects in a straight line.
To align objects, do the following:
1. Select the target objects.
2. Click Object → Align, and select one of the following:
– Align Left: align objects to the left.
– Align Right: align objects to the right.
– Align Top: align objects to the top.
– Align Bottom: align objects to the bottom.
– Align Center Point: align center points of objects.
– Align Horizontal Midline: align horizontal central lines of objects.
– Align Vertical Midline: align vertical central lines of objects.
– Distribute Horizontally: distribute objects evenly and horizontally.
– Distribute Vertically: distribute objects evenly and vertically.
4.3.4 Scale Objects
This operation is used to make objects appear larger/smaller in equal proportion.
To scale objects, do the following:
1. Select the target objects.
2. Do one of the following:
– Enter the scaling factor in Scale input box and press Enter.
– Do the following:
1. Click Object → Scale.
2. Left click to select the center point for scaling.
3. Move the cursor to adjust the scaling factor and left click to
confirm.
To Next Page
Loading...
