上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
47 / 131
4.3.5 Group or Ungroup Objects
This operation includes the following:
• Group objects
• Ungroup objects
Group Objects
This operation is used to bind several objects, so as to edit them at the same time.
To group objects, do the following:
1. Select the target objects.
2. Do one of the following:
– In toolbar, click .
– In menu bar, click Object → Group/Break → Group.
– In drawing window, right click and select Group.
The selected objects are in a group and share the same operation.
Ungroup Objects
This operation is used to separate the grouped objects, so as to edit each part of the
objects independently.
To ungroup objects, do the following:
1. Select the target grouped objects.
2. Do one of the following:
– In toolbar, click .
– In menu bar, click Object → Group/Break → Break Group.
– In drawing window, right click and select Break Group.
The group becomes one of the following:
• Separate objects
• Separate objects and smaller groups
• Several smaller groups
To Next Page
Loading...
