上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
49 / 131
Combining result shows as follows:
4.3.7 Share an Edge
This operation is used to make the overlapped edges become a shared edge, so as to
avoid cutting the same edge repeatedly during machining. It is avaliable to closed
objects and the shared edge is a line or an arc.
To share an edge, do the following:
1. Select at least two objects.
2. To open CoEdge dialog box, do one of the following:
– In menu bar, click Object → CoEdge.
– In drawing window, right click and select CoEdge.
CoEdge dialog box pops up:
3. Select a strategy for the shared edge to define the cutting order:
– Grid: cut internal objects first.
– C Type: cut objects in the shape of a character C.
The objects turn into a group.
To Next Page
Loading...
