上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
54 / 131
4.3.11 Execute Array (Exclusive for Rectangular Tube Cutting)
This operation is used to copy the machining objects and arrange them in order, so
as to improve machining efficiency. It is only applicable to rectangular tube cutting.
To execute array, do the following:
1. Select the target objects.
2. To open Tube Array dialog box, do one of the following:
– In menu bar, click Object → Tube Array.
– In drawing window, right click and select Tube Array.
Tube Array dialog box pops up:
3. Set the total number and space of array.
If Space L is set to 0, it is suggested to share an edge so as to avoid cutting the
same edge repeatedly during machining.
4. Select a rotation method:
– No rotation
The tube only executes translation array in Y-axis direction.
– Front-back
The tube rotates 180° in Y-axis direction.
To Next Page
Loading...
