上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
77 / 131
5.4.3 Specify the Machining Order for a Single Object
To specify the machining order for a single object, do the following:
1. Select the target object.
2. To open Manual Set dialog box, do one of the following:
– In menu bar, click Object → Mach Order → Specify Single.
– In drawing window, right click and select Mach Order → Specify Single.
Manual Set dialog box pops up:
3. Enter an order.
The machining order for the selected object turns to the specified order.
5.4.4 Change the Machining Order in a List
To change the machining order in a list, do the following:
1. Select an object.
2. To open List dialog box, do one of the following:
– In menu bar, click Object → Mach Order → Order List.
– In drawing window, right click and select Mach Order → List.
List dialog box pops up:
To Next Page
Loading...
