Maintenance2124−3/A1
Winterthur Gas & Diesel Ltd.
4/ 4
WCH00106
015.739/07
II-II
III
III
Rounded Edges
WCH03094
Fig. 3
II
II
1
2) After the repair is completed, fully clean the lubricating grooves and the bore of
the cylinder liner.
3) Remove unwanted particles, which may have passed into the scavenge space
through the ports.
4) Manually operate the cylinder lubrication until oil flows from all the lubricating
points. This will flush away unwanted metal dust.
Cylinder Liner: Re-dressing Lubricating Grooves and Scavenge Ports
2016
To Next Page
Loading...