WinGD RT-flex50DF - Page 393

Maintenance
5556−1/A1
Winterthur Gas & Diesel Ltd.
11/ 13
21) Operate the applicable lifting tools to
put the guide piston (3, Fig. 18) into the
housing. Make sure that the groove is
opposite the bore for the guide pin (2).
22) Remove the eye bolts (EB).
23) Attach the tool (94551, Fig. 19) as
shown.
24) Turn the handle (3) to push down the
guide piston (2) until you can install the
guide pin (1). If the guide pin touches
the guide groove, turn the pressure
piece (4) to align the guide pin.
25) Remove the tool (94551)
Fuel Pump: Removal, Disassemble, Assemble, Installation
2016
013.671/05
94551
21
Fig. 18
1
013.671/05
32
Fig. 19
4
3