WinGD RT-flex50DF - Page 4

Summary for Maintenance Manual
(MM)
Page No. Title Subject
Date No.
new exch.
Manual
Modification Service
Engine Documentation
RT-flex50DF
Modification
Page or
Group 5 ToC 2018-01 WinGD input ToC 5555-2/A1 added x
2140-2/A1 2017-12
Update
WinGD
Exhaust Valve:
Disassemble and
Assemble
Pge 7: Para 5, Steps 10 to 12 changed.
x
2751-2/A1 2017-12 WinGD input
Exhaust Valve:
Disassemble and
Assemble
Page 6: Procedure changed,
x
Date of publication 2018-01-23
0330-1/A1 2018-02 WinGD Input Group 5 ToC Page 21: Note added
x
Group 2 ToC 2018-02 EAAD087460 Group 5 ToC
New documents added to ToC (2708-4/A1, 2708-5/A1 and
2708-6/A1)
x
2138-1/A1 2018-02 WinGD Input Lubricating Quill
Pge 1: Dismantling tool 94213 added to tool list. Pge2:
Replace procedure added.
x
2140-1/A1 2018-02 WinGD Input Gas Admission Valve Pge 7. Steps 10 to 14 changed.
x
2708-4/A1 2018-02 EAAD087460
Sealing Face for the
Pilot Injection Valve
Position - Grind
New procedure
x
2708-5/A1 2018-02 EAAD087460
Sealing Face for the
Fuel Injection Valve
Position - Grind
New procedure
x
2708-6/A1 2018-02 EAAD087460
Sealing Face for the
Prechanmber - Grind
New procedure
x
2751-1/A1 2018-02
Customer
input
Exhaust Valve:
Replacement of
Elastic Studs
Pge 6: Fig. 10 - Flow direction changed.
x
2751-2/A1 2018-02 WinGD Input
Exhaust Valve:
Disassemble and
Assemble
Pge 7: Steps 6 to 10 changed.
x
2790-1/A1 2018-02 WinGD Input
Pilot Injection Valve:
Removal,
Disassemble, Check,
Assemble, Installation
Pge 1: ToC changed. Pge 2: Procedure changed. Pge 5: data
added. Pge 7: Data added,
x
2722-1/A1 2018-02 WinGD Input
Injection Valve:
Removal and
Installation
Pge 3: Warning about copper paste added
x
2722-2/A1 2018-02 WinGD Input
Injection Valve:
Disassemble, Checks,
Assemble
Pge 7: Warning about copper paste added
x
Group 5 ToC 2018-02 WinGD Input Group 5 ToC
Pilot Fuel Supply Pump: Removal and Installation 5555-2/A1
inserted. Fuel Pressure Control Valve: Manual Release Valve -
Clean 5562-1/A2 inserted.
x
5552-5/A1 2018-02 Wartsila Input
Lubrication of Supply
Unit during
Maintenance
Procedure changed. New illustration added.
x
5555-2/A1 2018-02 WinGD Input Group 5 ToC
New documemnt: Pilot Fuel Supply Pump: Removal and
Installation 5555-1/A1
x
5562-1/A2 2018-02 WinGD Input
Fuel Pressure Control
Valve: Manual
Release Valve - Clean
New procedure.
x
9403-3/A1 2018-02 Wartsila Input
Hydraulic Pre-
tensioning Jacks
Pges 3 to 11: Sealing kits added.
x
2/3 19/03/2018