4-40 Phaser 4500 Service Manual
7
1. Power off the printer and remove the first
DIMM.
2. Install the second DIMM and power on
the printer.
Is a memory fault message displayed?
Go to Step 8 Go to Step 9
8
1. Power off the printer and move the
suspected defective DIMM to the other
memory socket.
2. Power on the printer.
Does the DIMM fail in the new location?
Replace the DIMM
and go to step 9
Replace the I/P
board
(page 8-92)
9
Install all of the DIMMs and power on the
printer.
Is a memory fault message displayed?
Replace the I/P
board
(page 8-92)
Problem Solved
Troubleshooting Procedures (Continued)
To Next Page
Loading...
Need help?
General