Scanning
Phaser 6121MFP Multifunction Printer
User Guide
107
Selecting Scan Settings for a Single Job
To temporarily change a scan setting when emailing the scanned image:
1. On the printer control panel, press the Scan button.
2. Select the scan destination and then press the OK button.
3. Press the Down Arrow button to move through the menu settings. Select a setting to change and
then press OK.
4. Change the selected setting as desired and then press OK.
Note: For a list of setting options, see Scan Menu – Main on page 149.
5. Press the desired Start button to begin the scan.
To Next Page
Loading...
